Universal oil cooler mounting kit for most common style of coolers such as Mocal, Setrab and Earls.
This kit contains the following parts;
- Two steel brackets for mounting your oil cooler quickly and neatly. Save time and money over making your own! These have the correct hole pattern for mounting to a standard Mocal, Earls or Setrab oil cooler, as well as others. These are not handed, just flip the bracket over to change which side it mounts. Can be used in line with the oil cooler mounting tabs or at 90 degrees to them. The opposite end of the brackets are left blank and because they're bare steel, can be welded or drilled and bolted in place, depending on your particular application. This also means the bracket can be painted the vehicle colour after welding or once drilled. Can be painted, powder coated or plated.
Dimensions are as follows:
Hole centres: 22mm
- Four rubber mounting bobbins for protecting the oil cooler from harsh engine vibrations, these fit between the oil cooler and the bracket.
Dimensions are as follows;
Total length: 51mm
Rubber diameter: 19mm
Rubber length: 15mm
Thread size: M6
Supplied with nuts and washers.
These parts are available individually, please see below under related products. This kit saves you over 10% on buying the parts individually.